Updating the flip usb driver avr


23-Dec-2019 18:36

Also, the firmware has been in more than one repository on github, so how do you know you are loading the most current? The third has never successfully operated as a server. To upgrade firmware I installed Atmel/Flip 3.4.7 and I use these command :- Directory : C:\Program Files (x86)\Atmel\Flip 3.4.7 -device AT32UC3A1512 -hardware usb -operation erase f memory flash blankcheck loadbuffer wifi program verify start reset 0Can you explain me what is my problem please ? To upgrade firmware I installed Atmel/Flip 3.4.7 and I use these command :- Directory : C:\Program Files (x86)\Atmel\Flip 3.4.7 -device AT32UC3A1512 -hardware usb -operation erase f memory flash blankcheck loadbuffer wifi program verify start reset 0Can you explain me what is my problem please ?

After passing all checks, the shield's green Link LED is lit for a second, and then the blue Data LED is lit and the blue LED does not seem to turn off. I assumed this means the data was being written from the Atmel to the HDG104.

If you read the comments in the forum, nobody seems to report success with the product. I then tried upgrading the shield firmware (have 1.0.5 IDE), and after some effort got what almost looked ok except the bootloader overlap warning (see below). Regards, Ric C:\Program Files\Atmel\Flip 3.4.7\-device AT32UC3A1256 -hardware usb -operation erase f memory flash blankcheck loadbuffer wifi_program verify start reset 0Running batchisp 1.2.5 on Wed Feb 12 2014AT32UC3A1256 - USB - USB/DFUDevice selection.......................